>contact
ALTEC BALE GRIPPERS
HANDLERS WITH STRAIGHT TINES
FRONTLOADER LINE
TELESCOPIC LOADER LINE
DIRECT-ON-TRACTOR LINE
GRABS FOR WRAPPED BALES
ALTEC FITTING
> Square Bales
To be installed directly on tractor
 
M40DF
  • 8 straight tines.
  • 1 DA or SA ram (to be specified).
  • ground clearance 2.80 m.
  • capacity : 2000 kg
M40DR
  • 8 straight tines.
  • 1  DA or SA ram( to be specified)
  • four Ø1,80 m round bales 
  • capacity :  2400 kg
 
 
MA300D - MA400D - MA500D
  • with 2 ø 35 m tines bayonet. effective lenght 1,10m.
  • 3 pts linkage - Cat 2.
  • installation to the front with standard hardware or hardware-specific type of tractor.
  • storage : MA300D = 3 ranks MA400D = 4 ranks et MA500D = 5 ranks
  • capacity : 600 kg
 
MA300G - MA400G - MA500G
  • with 4 ø 25 tines compact claws.
  • rolling bales using the integrated system changeover.
  • 3 pts linkage - Cat 2
  • installation to the front with standard hardware or hardware-specific type of tractor.
  • storage : MA300G = 3 ranks MA400G = 4 ranks et MA500G = 5 ranks
  • capacity : 600 kg
 

 
MA600G
  • with 4  ø 25 tines compact clamps
  • bale pick up above ground.
  • 3 pts linkage - Cat 2.
  • installation to the front with standard hardware or hardware-specific type of tractor.
  • storage : MA600G = 6 ranks
  • capacity :  600 kg
   
 
  • the  MA150P model grasp the bale in any position and stores it in two rows

  • the  MA300P and MA400P models also pick up the bale in any position and like all the ALTEC grabs, can be used for hay, straw or flax

  • the MA410P model is designed to work with bales weighing up to 1000 kg.
MODELS
  Lift height Bale pick up Ram Height from ground
 Weight
MA 300 D 2,70 m Tines 1 SA 1,80 m 200kg
MA 400 D 3,80 m Tines 1 SA 2,10 m 240kg
MA 400 G 4,00 m Clamps 1 SA, 2DA 2,10 m 290kg
MA 500 D 4,90 m Tines 1 SA 2,50 m 300kg
MA 500 G 5,20 m Clamps 1 SA, 2DA 2,50 m 350kg
MA 600 G 6,40 m Clamps 1 SA, 2DA 2,50 m 390kg
 
  

 
M15DL rear
  • with 2 straight ø 40 bayonet tines effective lenght 1.10 m or 0.80 m (3rd and 4th tines as an option)
  • 3 pts linkage - Cat 2. also available on telescopic loader - capacity 1500 kg.
M16D rear
  • with 3 ø 40 bayonet tines effective lenght 1,10 m ou 0,80 ( 4th tines as an option)
  • 3 pts linkage - Cat 2. also available on telescopic loader.
  • capacity : 1600 kg
M20D rear
  • with 2 adjustable support up to 1.90 m high - with 2 stabilizing spikes.
  • with 4 straight ø 40 bayonet tines effective lenght 1.10 m
  • 3 pts linkage - Cat 2. also available on telescopic loader.
  • capacity : 1800 kg
MA400MC
  • with 3 points rear mounting or mounted directly to the front of the tractor.
  • MC4 type clamp with 3.80 m lift single acting ram.
  • with hydraulic tipping as an option.
  • capacity : 600 kg ( version MA410  capacity : 1000 kg )
MA500MC
  • as for MA400MC with 4,90 m lift.
MA700
  • with 3 points rear mounting or mounted directly to the front of the tractor.
  • storage at more than 6 m - double clamps 8 tines type MC700 opposite.
  • horizontal rotation of 110° to store bales lenght or width wise.
  • with head lift to store flush with roof.
  • capacity : 800 kg.
  Capacity
 Bale pickup Ram Height from ground Weight
M15DL back - 2 straight tines - 0,90 m 130kg
M16D back - 3 straight tines - 1,10 m 150kg
M20D back - 4 straight tines - 1,10 m 190kg
MA400MC 3,80 m 6 tine clamp 1 SA + 1DA 2,10 m 280kg
MA500MC 4,90 m 6 tine clamp 1 SA + 1DA 2,50 m 320kg
MA700 5,80 m 8 tine clamp 1 SA + 3DA 2,50 m 380kg
 
F-12200 MORLHON - FRANCE Tel +33 5 65 29 95 88 Fax + 33 5 65 29 95 89 COPYRIGHT © 2009 ALTEC