|
1 Central drive = one single
hydraulic drive. Both left and right endless screws always turn the
same speed, in any condition…
2 Flow control valve : regulates the
rotation speed of screws and provides more or less lime depending of
the stated dose.
3 Un-aligned endless screws :
bottom screws do the distribution, while top screws on the hopper's
side reduce the risk of the lime staying as a mount, and
ensures a correct repartition inside the hopper.
4 Feeding gates : one single
on the hopper (center) and one on both booms.
5 Folding booms : very secure in
case of hitting an obstable at work, built in 4mm-thick sheet steel.
|
|
6 Folded booms : limited bulk at
the rear (EP600 : 1.65m)
7 Spring lock :
holds the booms in work position despite
any shock or bue due to the irregular ground.
8 Booms articulation : bushed
pivots + grease nipples.
9 Tubular frame : all around the
hopper for a maximal stiffness.
10 Reinforced hopper : with 3 and
4mm-thick steel sheet, the hopper always keep its shape.
|
|
