|
|
|
 |
|
M10G
- Compact clamp with strippers with 4
curved ø 25 mm tines.
- 0.40 m gain in height thanks to offset or
tines with respect to ground.
- grabs all round bales on cylindrical side
or on the flat, as well as square bales (one at a time)
- Stores 4 round bales if the loader will
lift to at least 3.40 m.
- Working capacity: 600 kg.
|
|
|
 |
|
M10GS
- Like M10G on 3-positions section: +0.40 m
to + 0.90 m.
- Locked by key pin.
- Stores 4 round bales stacked vertically
if loader lifts to at least 2.90 m.
- working capacity: 600 kg.
|
|
M10GS4
- Like M10GS with 4-positions section: +
0.40 m to 1.20 m.
- Stores 5 round bales stacked
vertically if loader lifts to at least 3.70 m.
- Working capacity : 600 kg.
|
|
 |
|
M10GR
- Claw type M10G with hydraulic tipping - 2 double acting rams - capacity 600 kg.
- As an option similar to M10GS or M10GS4
- installation on forklift and lifting
ramp.
|
|
|
 |
|
M10D
Front
- Capacity 1000 kg - optional folding
tines - optional adjustable support.
- 4 sleeves (2 at top and 2 at the
bottom)gaining 0.80 m in height - with two 35 mm dia. bayonet tines -
effective length 1.10 m (0.80m as an option).
|
|
|
 |
|
M11
- M11 E with built-in Euro attachment.
- M11 F with built-in Faucheux attachment.
- M11 M with built-in Mailleux attachment.
- Two Ø 35 mm bayonet tines -
effective lenght 1.10 m.
|
|
|
 |
|
M12DR
Front
- capacity 1500kg
- With four Ø 35 mm bayonet tines -
effective lenght 1.10 m (0.80 m as an option)
- adjustable width (locking by shaft) from
1.80 m to 2.40 m.
|
|
|
 |
|
M15D
Front
- capacity 1500kg
- Optional folding tines.
- Optional adjustable support.
- Two Ø 40 mm bayonet tines.
- Effective lenght 1.10 m (0.80 as an
option).
|
|
| |
Lift height |
Capacity |
Bales pick up |
Ram |
Height from ground |
Weight |
| M10D front |
0,70m |
1000 kg |
2 straight tines |
- |
0,80 m |
70 kg |
| M15D front |
- |
1500 kg |
2 straight tines |
- |
0,80 m |
120 kg |
| M12DR |
- |
1500 kg |
4 straight tines |
- |
1,00 m |
180 kg |
| M10G |
0,40
m |
600 kg |
4 tines clamps |
1 DA |
0,65 m |
90 kg |
| M10GS |
0,40
à 0,90m |
600 kg |
4 tines clamps |
1 DA |
1,20 m |
110 kg |
| M10GS4 |
0,40
à 1,20m |
600 kg |
4 tines clamps |
1 DA |
1,50 m |
125 kg |
| M10GR |
0,40m |
600 kg |
4 tines clamps |
2 DA |
0,80 m |
150 kg |
| |
and
also models
FOR telescopic handlers
|
|
m12g
- m12gs - m14g
m22g
m15dl - m16d -m20d
m21mc - m31mc |
|
