|
|
| |
MC700 |
MC4 |
MA500MC |
MS142MC |
|
|
 |
|
M15DL
- With 2 ø 35 bayonet tines - effective
lenght 1,10 m or 0,80 as an option.
- 1.20 m between 2 tines - 3rd and
4th tines as an option - folding tines as an option.
- Supplied with adjustable height support.
- capacity: 1500 kg.
|
|
|
 |
|
MCE
- With 2 ø 35 bayonet tines - effective
length 1.10 m or 0.80 m as an option.
- 1.20 m between 2 tines - with
parallelogram pusher base.
- capacity: 600 kg.
|
|
|
 |
|
MC4
- With 6 curved tines, ø 25, lenght 440 mm
(530 as an option).
- Pick-up and deposit of bales in same
direction.
- Great ease in picking up bales from the
ground of from trailer: the bales are not pushed back.
- Great ease in depositing bales in stacks:
the bales stay properly
in place in the stack and do not roll back towards the
tractor.
- iIdeal for bales with a section of 0.50
x 0.80 (4 bales at a time)
and for bales of 0.80 x 0.80 or 0.60 x 0.90 (2 bales at a time).
- Adjustable height support.
- capacity: 600 kg (MC21MC : capacity 1200
kg, for telescopic units).
|
|
|
 |
|
MC4D
- Like MC4 above with the "frame+2
straight ø 35 tines" option mounted at the bottom.
- This option included 2 straight tines.
- Useful for bales 1.20 m wide.
|
|
|
 |
|
M12GS
-
Multipurpose for round o square bales.
- With 8 curved tines.
- 1.10 m hight.
- With 0.50m high lift - 3 position mast -
locks with a pin.
- To move easily fron one position to
another tilt the mast to horizontal using the hydraulic tipper.
- To a large frontloader, allows 4th ad 5th
bales at time.
- capacity :1000 kg
|
|
|
|
|
MS142MC
- 1.50 m high lift using
parallelogram one double acting ram).
- Bale pickup and deposite in the same
diection.
- Great ease in picking up bales from the
ground of from trailer ; the bales are not pushed back.
- Great ease in depositing bales in the
stacks : the stack and do not roll back towards the tractor.
- Capacity : 1000 kg.
|
|
|
 |
|
MS240MC
Like MS142 but with :
- 2.40 m lift.
- capacity 600 kg
|
|
MS242MC
Like M240MC but with
|
|
 |
|
MC700
- On large front loader, backhoe of fork
lift.
- Head lift for storing flush against the
roof.
- Horizontal rotation of 100° to store
bales lenght or width wise.
- Double clamps 8- tines ø 25 tines x 530
mm ( 1 or 2 square bales at a time).
- Storage at more than 7 m.
- Smooth parallelogram lifting movement.
- as on all Altec models the shafts have
wearing bushes and greasers.
- capacity : 800 kg.
|
Nitrogen sphere and pressure gauge (extra features). |
| |
Lift height |
Capacity |
Bale pick up |
Rams |
Number of bales |
Weight |
| M15DL |
- |
1500 kg |
2 straight
tines |
- |
1 to 4 |
120 kg |
| MCE |
- |
600 kg |
2 straight
tines |
1 DA |
1 to 4 |
150 kg |
| MC4 |
- |
600 kg |
6-tine clamp |
1 DA |
1 to 4 |
100 kg |
| MS142DL |
1,50 m |
1000 kg |
2 straight
tines |
1 DA |
1 to 4 |
170 kg |
| MS142MC |
1,50 m |
1000 kg |
6-tine clamp |
2 DA |
1 to 4 |
200 kg |
| M240MC |
2,40 m |
600 kg |
6-tine clamp |
2 DA |
1 to 4 |
240 kg |
| M242MC |
2,40 m |
1000 kg |
6-tine clamps |
2 DA |
1 to 4 |
280 kg |
| MC700 |
3,50 m |
800 kg |
8-tine clamp |
4 DA |
1 or 2 |
320 kg |
| MA400MC |
3,80 m |
600 kg |
6-tine clamp |
1 SA + 1DA |
1 to 4 |
280 kg |
| MA500MC |
4,90 m |
600 kg |
6-tine clamp |
1 SA + 1DA |
1 to 4 |
320 kg |
| MA700 |
6,50 m |
800 kg |
8-tine clamp |
1 SA + 3DA |
1 or 2 |
380 kg |
|
